본 이용약관은 줄걸이 안전(RiggingSafety)(이하 "본 사이트")의 이용 조건과 서비스 제공자와 사용자 간의 권리·의무를 규정합니다. 본 사이트를 이용함으로써 사용자는 아래 약관에 동의한 것으로 간주됩니다.
These Terms of Service set out the conditions for using RiggingSafety (hereinafter "this site") and the rights and obligations between the service provider and the user. By using this site, you are deemed to have agreed to the terms below.
본 사이트의 모든 계산 결과는 교육 및 학습 목적의 참고 자료로만 제공됩니다. 실제 산업 현장의 인양·리깅 작업에 직접 사용해서는 안 되며, 반드시 자격 있는 리깅 전문가의 검토와 현장 안전 절차를 따라야 합니다.
All calculation results from this site are provided as educational and learning reference material only. They must not be used directly for actual industrial lifting / rigging operations. The review of a Qualified Rigger and on-site safety procedures must always be followed.
본 사이트는 줄걸이(리깅) 작업의 안전을 위한 교육·정보 도구로서 다음 기능을 제공합니다.
This site is an educational and informational tool for rigging-work safety, providing the following functions.
본 사이트는 다음을 위한 도구가 아닙니다.
This site is NOT intended as:
본 사이트의 운영자, 개발자, 기여자는 다음에 대해 어떠한 명시적·묵시적 보증도 하지 않습니다.
The operator, developers, and contributors of this site make no representations or warranties, either express or implied, regarding the following.
본 사이트는 어떠한 경우에도 본 사이트의 사용 또는 사용 불가로 인해 발생하는 직접·간접·우발적·특별·결과적·징벌적 손해 (인명 사고, 재산상 손해, 사업 중단, 데이터 손실, 평판 손상 등을 포함하나 이에 한정되지 않음)에 대하여 책임을 지지 않습니다. 이는 사전에 그러한 손해의 가능성을 통지받은 경우에도 마찬가지입니다.
Under no circumstances shall this site be liable for any direct, indirect, incidental, special, consequential, or punitive damages (including but not limited to personal injury, property damage, business interruption, data loss, or reputational harm) arising from the use of or inability to use this site. This applies even if we have been advised of the possibility of such damages in advance.
본 사이트를 이용하는 사용자는 다음에 대한 책임을 집니다.
By using this site, the user assumes responsibility for the following.
본 사이트의 모든 콘텐츠(텍스트, 이미지, 그래픽, 소스 코드, 디자인, 로고, 계산 로직 등)는 운영자 또는 정당한 권리자에게 귀속되며, 저작권법과 관련 법령으로 보호됩니다. 사용자는 개인적·비상업적 학습 목적의 화면 캡처는 허용되나, 그 외의 복제·재배포·상업적 사용은 사전 서면 동의가 필요합니다.
All content on this site (text, images, graphics, source code, design, logos, calculation logic, etc.) belongs to the operator or its rightful owners and is protected by copyright and applicable laws. Screen captures for personal, non-commercial learning are permitted; any other reproduction, redistribution, or commercial use requires prior written consent.
특히 본 사이트의 코드 구현 방식, 사용자 인터페이스 디자인과 화면 구성, 분력도(Force Diagram) 등 시각화 방식, 한·영 안내 문구, 그리고 이들의 전체적인 구성은 운영자의 창작적 표현으로서 저작권의 보호를 받습니다. 운영자의 사전 서면 동의 없이 이러한 표현을 전부 또는 상당 부분 복제·재배포하거나 2차적 저작물을 작성하는 행위를 금합니다.
In particular, the code implementation, user-interface design and screen layout, visualizations such as the Force Diagram, bilingual texts, and their overall composition of this site constitute the operator's creative expression and are protected by copyright. Reproducing or redistributing this expression — in whole or in substantial part — or creating derivative works of it without the operator's prior written consent is prohibited.
다만 본 사이트가 보호하는 대상은 위와 같은 표현 방식이며, 계산에 사용된 물리·공학 공식(장력·필요 WLL·히치 효율 등) 자체는 공개된 산업 표준으로서 저작권의 보호 대상이 아닙니다. 누구나 해당 공식을 자유롭게 학습하고 활용할 수 있으며, 본 조항은 공식 자체가 아니라 그 표현 방식을 보호합니다.
That said, what this site protects is the expression described above; the physical and engineering formulas themselves (tension, required WLL, hitch efficiency, etc.) are open industry standards and are not subject to copyright. Anyone is free to learn from and apply those formulas — this clause protects the expression, not the formulas themselves.
※ 본 사이트에서 언급되는 Crosby®, Green Pin® 등 모든 상표는 각 권리자의 자산이며, 본 사이트는 해당 회사·기관과 무관한 독립 교육용 정보 사이트입니다.
※ Crosby®, Green Pin®, and all other trademarks mentioned on this site are the property of their respective owners; this site is an independent educational information site and is not affiliated with those companies or organizations.
※ 폐기 기준 페이지의 표는 KS 규격(KS B 6241/6242/6243/1333)을 요약·인용한 교육용 자료이며, 해당 규격의 저작권은 국가기술표준원에 있습니다. 본 사이트는 인용을 통해 정보 전달 목적으로만 사용하며, 규격 원문은 국가표준인증통합정보센터에서 확인하실 수 있습니다. "LEEA"는 Lifting Equipment Engineers Association의 명칭으로, 본 사이트는 LEEA와 별개의 독립 사이트입니다.
※ The discard-criteria tables on this site are an educational summary citing KS standards (KS B 6241/6242/6243/1333); copyright of those standards rests with the Korean Agency for Technology and Standards. Citations here are made for informational purposes only — full original texts are available at standard.go.kr. "LEEA" refers to the Lifting Equipment Engineers Association; this site is independent of LEEA.
본 사이트는 외부 사이트로의 링크(특히 네이버 블로그 카테고리·검색 리다이렉트)를 포함할 수 있으며, Google AdSense를 통한 광고를 게재할 수 있습니다. 네이버 블로그는 본 사이트와 별개의 외부 서비스이며, 본 사이트 운영자가 작성한 콘텐츠라 하더라도 해당 글의 게시·운영은 네이버 블로그의 이용약관·정책 하에 이루어집니다. 외부 사이트와 광고주의 콘텐츠·정책에 대한 책임은 해당 운영자에게 있으며, 본 사이트는 이에 대해 어떠한 보증이나 책임도 지지 않습니다.
This site may include links to external sites (notably Naver Blog category links and search redirects) and may display advertising through Google AdSense. Naver Blog is a separate external service; even when the content there is written by this site's operator, its hosting and operation are governed by Naver Blog's own terms and policies. The content and policies of external sites and advertisers are the responsibility of their respective operators; this site makes no warranty and accepts no liability with respect to them.
광고 송출 및 외부 리다이렉트와 관련된 데이터 처리 사항은 개인정보처리방침을 참고하십시오.
For data handling related to ad delivery and external redirects, please see the Privacy Policy.
사용자는 다음 행위를 해서는 안 됩니다.
Users must not engage in any of the following.
본 사이트는 사전 통지 없이 서비스의 전부 또는 일부를 변경하거나 중단할 수 있습니다. 이로 인한 사용자의 손해에 대해 본 사이트는 책임을 지지 않습니다.
This site may change or suspend all or part of the service at any time without prior notice. This site assumes no liability for any user damages arising from such changes or interruptions.
본 약관은 관련 법령 및 서비스 운영 방침의 변경에 따라 수정될 수 있습니다. 변경된 약관은 본 페이지에 게시한 시점부터 효력이 발생하며, 사용자가 변경 후에도 본 사이트를 계속 이용할 경우 변경된 약관에 동의한 것으로 간주됩니다.
These Terms may be revised in response to changes in applicable laws and operational practices. Revised Terms take effect from the moment they are posted on this page, and continued use of this site after such changes is deemed to constitute acceptance of the revised Terms.
본 약관은 대한민국 법령에 따라 해석되며, 본 사이트의 이용과 관련하여 발생한 분쟁에 대해서는 대한민국 법령 및 서비스 제공자 소재지를 관할하는 법원을 1심 관할 법원으로 합니다.
These Terms shall be governed by and construed under the laws of the Republic of Korea. Any dispute arising in connection with the use of this site shall be subject to the laws of the Republic of Korea, with the court of competent jurisdiction at the service provider's location as the court of first instance.
본 사이트는 LEEA(Lifting Equipment Engineers Association) 자격을 보유한 개인이 교육 목적으로 운영하는 정보 사이트이며, 사업자 등록된 법인 운영체가 아닙니다. 본 사이트는 인양 장비를 판매하거나 검사·인증 서비스를 제공하지 않으며, KS·LEEA 등 표준 단체의 공식 정보 채널이 아닙니다.
This site is run by an individual with an LEEA (Lifting Equipment Engineers Association) qualification on an educational basis; it is not operated by a registered legal entity. It does not sell lifting equipment or provide inspection/certification services, and it is not an official information channel for any standards body (KS, LEEA, etc.).
약관 관련 문의는 위 이메일로 보내주십시오.
For questions about these Terms, please use the email above.