줄걸이 안전 · RiggingSafetyRiggingSafety · 줄걸이 안전
줄걸이 안전(RiggingSafety) 소개
About RiggingSafety
줄걸이 안전(RiggingSafety)은 현장 줄걸이 작업자와 안전 관리자를 위해
계산 도구·점검 도구·안전 정보를 한곳에 모은 교육 정보 사이트입니다.
간단 줄걸이 계산기(슬링 장력·필요 WLL), 줄걸이용구 폐기 기준(KS 규격 요약),
작업 전 안전 점검 체크리스트, 그리고 네이버 블로그 안전 콘텐츠 연동까지 제공합니다.
LEEA 자격을 보유한 개인이 교육 목적으로 운영하며, 누구나 무료로 이용할 수 있습니다.
RiggingSafety brings together calculation tools, inspection aids, and rigging safety
knowledge for field riggers and safety managers.
Services include the Simple Sling Calculator (sling tension & required WLL),
Rigging Gear Discard Criteria (KS-standard summaries), a Pre-Task Safety Checklist,
and integrated Naver-blog safety content. It is run by an LEEA-qualified individual on an educational basis and is free for everyone.
📘 계산기를 더 깊이 이해하고 싶다면 — 입력값의 의미, 각도에 따라 장력이 급증하는 이유, 분력도 읽는 법, 자주 하는 실수까지 줄걸이 계산기 사용 가이드 →에서 풀어서 설명합니다.
📘 Want to understand the calculator more deeply? What each input means, why tension spikes with angle, how to read the force diagram, and common mistakes — see the Sling Calculator Usage Guide →.
i
이 사이트는 무엇인가요? What this site offers
What this site offers
줄걸이 안전(RiggingSafety)은 "계산하고, 점검하고, 안전하게"를 목표로,
현장에서 바로 쓰는 도구와 검증된 줄걸이 안전 정보를 한곳에서 제공합니다.
Under the idea of "calculate, check, and stay safe," RiggingSafety brings field-ready tools
and verified rigging safety information together in one place.
- 간단 줄걸이 계산기 — 슬링 각도에 따른 장력과 필요 WLL을 즉시 계산합니다. (아래에서 자세히 안내 · 사용 가이드)
- 줄걸이용구 폐기 기준 — 와이어로프·섬유제(벨트)·체인 슬링·섀클 4종의 폐기 판정 기준을 KS 규격(KS B 6242/6241/6243/1333) 요약으로 안내합니다.
- 작업 전 안전 점검 체크리스트 — 권상(인양) 작업 시작 전 확인해야 할 10개 핵심 항목을 점검합니다. 진행률·체크 상태가 기기 내에 자동 저장됩니다.
- 네이버 블로그 연동 안전 정보 — 장비·계산·현장 사례·규정 5개 카테고리를 본 사이트에서 카드 클릭 또는 검색창으로 바로 열어볼 수 있습니다.
- Simple Sling Calculator — Instantly computes tension and required WLL by sling angle. (details below · usage guide)
- Rigging Gear Discard Criteria — Discard judgment criteria for wire-rope, web (belt), chain slings, and shackles, summarized from KS standards (KS B 6242/6241/6243/1333).
- Pre-Task Safety Checklist — 10 key items to confirm before any lifting operation. Progress and check states are saved on your device automatically.
- Naver-blog safety content — Browse five blog categories (equipment, calculations, hazard cases, regulations, notices) directly from this site via category cards or a search box.
※ 아래에서 각 도구를 차례로 안내합니다. 가장 자세히 다루는 것은 본 사이트의 핵심 도구인 간단 줄걸이 계산기입니다.
※ Each tool is introduced below. The deepest coverage is for this site's core tool, the Simple Sling Calculator.
A
줄걸이용구 폐기 기준 Discard criteria
Rigging Gear Discard Criteria
줄걸이용구 폐기 기준 페이지는 와이어로프 슬링·섬유제(벨트) 슬링·체인 슬링·섀클 4종에 대해
마모·변형·균열·부식 등 폐기 판정 항목과 점검 방법(육안/계측/MT·PT),
폐기 기준 요약을 표 형식으로 한눈에 보여줍니다.
The Discard Criteria page presents — for wire-rope slings, web (belt) slings, chain slings, and shackles —
discard checkpoints (wear, deformation, cracking, corrosion, etc.),
inspection methods (visual / measurement / MT·PT NDT), and a summary of discard criteria
in a single, scannable table.
- KS B 6242 — 와이어로프 슬링
- KS B 6241 — 섬유제(벨트) 슬링
- KS B 6243 — 체인 슬링
- KS B 1333 — 섀클
- KS B 6242 — Wire-rope slings
- KS B 6241 — Web (belt) slings
- KS B 6243 — Chain slings
- KS B 1333 — Shackles
※ 본 페이지의 내용은 KS 규격 및 산업안전보건기준의 요약·교육용 자료입니다.
규격·법령은 개정될 수 있으므로 적용 전 국가표준인증통합정보센터
및 국가법령정보센터에서 최신본을 확인하시고,
실제 폐기 판정은 자격을 갖춘 책임자의 점검·판단에 따라 시행하시기 바랍니다.
※ The page content is an educational summary of the relevant KS standards and occupational safety rules.
Standards and laws may be revised — always verify the latest version at
standard.go.kr and
law.go.kr, and any actual discard decision must be made
by a qualified responsible inspector.
B
작업 전 안전 점검 체크리스트 Pre-task checklist
Pre-Task Safety Checklist
작업 전 안전 점검 체크리스트는 권상(인양) 작업을 시작하기 전 확인해야 할
10개 핵심 항목을 인터랙티브하게 점검할 수 있도록 구성된 도구입니다.
The Pre-Task Safety Checklist is an interactive tool covering
10 key items to be confirmed before starting any lifting operation.
- TBM(작업 전 안전미팅) 참석, 권상 부속품 표시(WLL·식별번호·증명 유효기간·컬러 코딩), 안전장비 정상 작동 여부 등
- 작업 책임자 인지, 환경 조건(풍속 등), 신호·커뮤니케이션 점검
- 실시간 진행률 표시 + 모든 항목 완료 시 "책임자 최종 승인 후 진행" 안내 배너
- 체크 상태는 사용자의 기기 안(localStorage)에만 저장되며, 외부 전송·다른 사용자 공유 없음
- TBM (Tool Box Meeting) attendance, tagging/marking of lifting accessories (WLL, ID, certificate validity, color coding), safety-equipment operability
- Lift supervisor awareness, environmental conditions (wind speed, etc.), signaling and communication checks
- Real-time progress bar plus a "obtain final supervisor approval before proceeding" banner when all items are checked
- Check states are saved only inside the user's device (localStorage); no external transmission or sharing
※ 본 체크리스트는 표준 예시이며, 현장 조건에 따라 항목이 가감될 수 있습니다.
작업 착수 여부는 자격을 갖춘 작업책임자의 위험성 평가와 판단에 따라 결정해야 합니다.
※ This checklist is a standard example; items may be added or removed depending on site conditions.
The decision to commence work must be made by a qualified supervisor based on a risk assessment.
C
안전 정보 (네이버 블로그 연동) Safety info via Naver blog
Safety info (Naver blog integration)
랜딩 페이지의 "줄걸이 안전 정보" 섹션은 운영자가 직접 작성하는
네이버 블로그(riggingsafety)의
안전 콘텐츠를 카테고리별로 안내합니다. 카드 클릭 또는 상단 검색창으로 본인 블로그의 글을 바로 찾아볼 수 있습니다.
The "Rigging Safety Info" section on the landing page links to safety content the operator writes on the
Naver blog (riggingsafety).
You can open posts directly via the category cards or the search box.
- 📐 쉬운 안전 계산 — 슬링 각도·하중·필요 WLL 계산법
- 🔧 장비 이야기 — 샤클·슬링·후크 등의 사용·점검
- 📋 안전 규정·기준 — 국제·국내 안전 기준과 폐기 기준 해설
- ⚠️ 위험한 작업 사례 — 현장 아찔 사례와 예방법
- 📢 공지사항·인사말 — 운영 소식과 업데이트
- 📐 Easy safety calculations — sling angle, load, required WLL
- 🔧 Equipment talk — shackles, slings, hooks, etc.
- 📋 Rules & standards — international and domestic safety/discard standards explained
- ⚠️ Hazard cases — close-call field cases and prevention
- 📢 Notice & greetings — operational news and updates
※ 검색창에 키워드를 입력하면 blog.naver.com/PostSearchList.naver?blogId=riggingsafety로 새 탭이 열리며,
본 사이트는 키워드를 저장하지 않습니다.
※ When you enter a keyword, a new tab opens to blog.naver.com/PostSearchList.naver?blogId=riggingsafety;
this site does not store the keyword.
1
이 앱이 계산하는 것 What it calculates
What it calculates
인양물의 무게와 슬링이 이루는 각도를 입력하면, 정역학(static equilibrium)에 따라
각 슬링이 받는 장력과 안전한 슬링·섀클 사양을 즉시 계산해 보여드립니다.
Enter the load weight and the sling angles, and the app instantly calculates the tension
on each sling and safe sling/shackle specifications based on static equilibrium.
- 슬링 장력 (T) — 인양각도가 클수록 슬링 한 줄에 걸리는 힘이 비선형적으로 커집니다.
- 수직·수평 분력 (V·H) — 인양물에 작용하는 압축력 분석에 활용됩니다.
- 필요 WLL (Required Working Load Limit) — 히치(연결) 효율을 반영한 슬링 선정 기준.
- 참고 섀클 — Crosby G2130 / Green Pin G4163 등 표준 사양 기준의 대표 카탈로그 값(예시).
- 안전 평가 (GOOD / CAUTION / WARNING / DANGER) — 인양각 기준 4단계 자동 등급.
- Sling Tension (T) — The larger the lifting angle, the more nonlinearly the load on each sling grows.
- Vertical / Horizontal Components (V · H) — Used to analyze compressive forces acting on the load.
- Required WLL (Working Load Limit) — Sling-selection criterion that reflects hitch (rigging) efficiency.
- Reference shackle — Representative catalog values (example) referenced to standard specs such as Crosby G2130 / Green Pin G4163.
- Safety Rating (GOOD / CAUTION / WARNING / DANGER) — 4-tier automatic grading based on the lifting angle.
2
주요 기능 Key features
Key features
⚖️
1~4줄 슬링 계산
1–4 leg sling calculation
단일·2줄·3줄·4줄 브라이들 모두 지원. 4줄은 보수적으로 3줄 분담 기준.
Supports single, 2-leg, 3-leg, and 4-leg bridles. 4-leg uses a conservative 3-leg load-sharing assumption.
↔️
2줄 비대칭 모드
2-leg asymmetric mode
두 슬링이 서로 다른 각도일 때 β₁, β₂를 각각 입력해 슬링별 장력을 분리 계산.
When the two slings sit at different angles, enter β₁ and β₂ separately to compute each sling's tension independently.
🔗
3종 슬링 + 3종 히치
3 sling types × 3 hitches
와이어로프 / 체인 / 합성섬유 × Vertical / Choker / Basket 조합 효율 자동 적용.
Wire rope / chain / synthetic × Vertical / Choker / Basket — efficiency factors are applied automatically.
📐
인라인 각도기
Inline inclinometer
스마트폰의 자이로 센서로 슬링 각도를 직접 측정해 그대로 입력. (HTTPS 환경 필요)
Measure the sling angle with your smartphone's gyroscope and apply it directly. (HTTPS required.)
📊
분력도 자동 작성
Automatic force diagram
계산된 V/H/T 벡터를 화면에 그려 직관적으로 이해할 수 있도록 시각화.
Renders the computed V/H/T vectors on screen so the load path is easy to grasp visually.
🔧
섀클 대표 사양 자동 표시
Automatic reference shackle
표준 카탈로그 데이터에서 필요 장력 이상의 가장 작은 사양을 자동 선정.
Picks the smallest specification from standard catalog data that meets or exceeds the required tension.
3
사용 방법 How to use
How to use
1
화물 중량 입력
Enter load weight
인양물의 총 중량을 톤(t) 또는 kN 단위로 입력합니다. 단위는 토글 버튼으로 전환할 수 있습니다.
Enter the total load weight in tons (t) or kilonewtons (kN). You can switch the unit with the toggle button.
2
슬링 구성 선택
Choose sling configuration
연결 줄 수(1~4), 슬링 종류(와이어로프/체인/합성섬유), 히치 방식(Vertical/Choker/Basket)을 선택합니다.
Pick the number of legs (1–4), the sling type (wire rope / chain / synthetic), and the hitch method (Vertical / Choker / Basket).
3
인양각도 입력
Enter the lifting angle
두 슬링이 이루는 내각(included angle)을 입력합니다. 2줄인 경우 비대칭 모드로 전환하면 각 슬링의 수직 기준각(β₁, β₂)을 따로 입력할 수 있습니다.
Enter the included angle between the two slings. For 2-leg lifts, switching to asymmetric mode lets you enter each sling's angle from vertical (β₁, β₂) independently.
4
(선택) 인라인 각도기로 측정
(Optional) Measure with the inline inclinometer
스마트폰을 슬링에 댄 채 "측정 시작"을 누르면 자이로 센서로 각도를 자동 인식합니다. iOS Safari는 권한 허용이 필요하며, HTTPS 환경에서만 동작합니다.
Press "Start measurement" with your smartphone held against the sling, and the gyroscope reads the angle automatically. iOS Safari requires permission, and the feature only works on HTTPS pages.
5
계산 실행
Run the calculation
"계산 실행" 버튼을 누르면 결과 화면으로 전환되어 안전 평가, 분력도, 필요 WLL, 참고 섀클, 적용 공식까지 확인할 수 있습니다.
Press the "Calculate" button to switch to the results screen, where you can review the safety rating, force diagram, required WLL, reference shackle, and the formulas used.
4
계산 원리 Calculation principles
Calculation principles
대칭 슬링의 경우
Symmetric slings
모든 슬링이 같은 각도로 균등하게 하중을 분담한다는 가정 아래,
각 슬링의 수직 분담 하중 V는 전체 하중 W를 유효 슬링 수 n으로 나눈 값입니다.
슬링이 수직선과 이루는 각을 β라 할 때,
Assuming all slings share the load equally at the same angle, the vertical component V on
each sling is the total load W divided by the effective number of slings n.
Letting β be the angle between the sling and the vertical line,
V = W / n
T = V / sin(α) = V / cos(β)
H = V / tan(α) = V · tan(β)
장력 배율 = 1 / sin(α) = 1 / cos(β)
Tension factor = 1 / sin(α) = 1 / cos(β)
여기서 α는 수평 기준각(α + β = 90°)이며, 실무에서 측정이 쉽기 때문에 α 기준으로 표기하는 경우가 많습니다.
Here α is the angle measured from horizontal (α + β = 90°). In the field, α-based notation is common because it is easier to measure.
2줄 비대칭의 경우
2-leg asymmetric case
두 슬링이 다른 각도(β₁, β₂)로 매달릴 때는, 인양물의 무게중심이 두 슬링이 만나는 수직선상에 있다는 평형 조건에서 다음이 유도됩니다.
When two slings hang at different angles (β₁, β₂), the equilibrium condition — that the load's center of gravity sits on the vertical line where the slings meet — yields:
수평 평형:
Horizontal equilibrium:
T₁·sin(β₁) = T₂·sin(β₂)
수직 평형:
Vertical equilibrium:
T₁·cos(β₁) + T₂·cos(β₂) = W
T₁ = W · sin(β₂) / sin(β₁ + β₂)
T₂ = W · sin(β₁) / sin(β₁ + β₂)
이 식에서 알 수 있듯, 수직에 가까운 슬링(β가 작은 쪽)이 더 큰 장력을 받습니다.
비대칭 인양에서 사고가 발생하는 핵심 메커니즘이 바로 이것입니다.
The equations show that the sling closer to vertical (smaller β) carries the larger tension.
This is the core mechanism behind asymmetric-lift accidents.
슬링 필요 WLL
Required sling WLL
계산된 슬링 장력 T를 히치 효율(Vertical 100%, Choker 75~80%, Basket 200%)로 나눈 값입니다.
이 값 이상의 WLL을 가진 슬링을 선정해야 안전합니다.
The computed sling tension T divided by the hitch efficiency (Vertical 100%, Choker 75–80%, Basket 200%).
A sling with a WLL at or above this value must be selected to be safe.
필요 WLL = T / 히치 효율
Required WLL = T / Hitch efficiency
!
중요한 안전 안내 Important safety notice
Important safety notice
본 사이트의 모든 결과·자료(계산 결과, 폐기 기준, 체크리스트 항목, 블로그 콘텐츠)는
교육 및 학습 참고용으로만 제공됩니다. 실제 산업 현장의 작업에 그대로 사용해서는 안 됩니다.
All results and materials on this site (calculations, discard criteria, checklist items, and blog content)
are provided for educational and learning reference only. They must not be used as-is for actual industrial operations.
- 현장의 실제 인양·점검·폐기 판정은 반드시 자격 있는 책임자(Qualified Rigger/Inspector)의 검토와 감독 하에 수행되어야 합니다.
- 국가별 산업안전보건법, 각 사업장의 안전 규정, 슬링·섀클 제조사의 최신 카탈로그·인증 데이터, KS 규격 최신본을 우선 적용하십시오.
- 계산기는 정역학적 이상 조건(슬링 길이 동일, 무게중심 중앙, 동적 충격 없음)을 가정합니다. 실제 현장에서는 슬링 길이 편차·충격 하중·비대칭 무게중심·마모·환경 조건 등 다양한 변수가 추가로 작용합니다.
- 폐기 기준은 KS 규격의 요약본이며, 체크리스트는 표준 예시입니다. 현장 조건과 작업 종류에 따라 가감되어야 합니다.
- 본 사이트의 정보 활용 결과로 인한 어떠한 직간접적 손해에 대해서도 운영자는 책임을 지지 않습니다. 자세한 내용은 이용약관을 확인하십시오.
- Real on-site lifting, inspection, and discard decisions must be performed under the review and supervision of a Qualified Rigger or Inspector.
- Apply your country's occupational safety and health laws, worksite safety rules, the latest manufacturer catalogs/certifications for slings and shackles, and the latest KS standards as the primary references.
- The calculator assumes idealized static conditions (equal sling lengths, centered CoG, no dynamic impact). Real worksites involve length variance, impact loads, off-center loads, wear, and environmental factors.
- The discard criteria are a summary of KS standards; the checklist is a standard example. Both should be adapted to site conditions and the specific task.
- The operator assumes no liability for any direct or indirect loss arising from use of this site. See the Terms of Service for details.
6
기술 정보 Technical info
Technical info
- 모든 계산 및 체크리스트 상태는 웹 브라우저 안에서 실시간 처리되며, 입력값·점검 결과는 외부 서버로 전송되지 않습니다.
- 체크리스트의 진행 상태는 브라우저의 localStorage에 저장되어 새로고침해도 유지되며, 기기 내부에만 보관됩니다.
- 블로그 검색은 키워드를 URL 파라미터로 네이버 블로그에 전달하고 새 탭에서 결과를 표시합니다. 본 사이트는 검색어를 저장하지 않습니다.
- 최신 Chrome, Safari, Firefox, Edge에서 정상 동작합니다. PWA로 설치 가능합니다(홈 화면 추가).
- 인라인 각도기 기능은 자이로 센서가 있는 스마트폰 + HTTPS 페이지에서만 동작합니다. iOS Safari는 13.0 이상에서 권한 허용 후 사용 가능합니다.
- All calculations and checklist state are processed in real time inside your browser; input values and check results are not transmitted to any external server.
- Checklist progress is saved in the browser's localStorage so it persists across reloads — but only on your device.
- Blog search passes the keyword to Naver Blog as a URL parameter and opens results in a new tab. This site does not store the keyword.
- Works in the latest Chrome, Safari, Firefox, and Edge. Can be installed as a PWA (add to home screen).
- The inline inclinometer requires a smartphone with a gyroscope sensor on an HTTPS page. iOS Safari needs 13.0+ with motion-sensor permission granted.
i
운영자 정보 Operator
Operator
본 사이트는 LEEA(Lifting Equipment Engineers Association) 자격을 보유한 개인이
교육 목적으로 운영하는 정보 사이트입니다. 사업자 등록된 법인 운영체가 아니며,
슬링·섀클·체인 등 인양 장비를 판매하거나 검사·인증 서비스를 제공하지 않습니다.
This site is run by an individual with an LEEA (Lifting Equipment Engineers Association) qualification
on an educational basis. It is not operated by a registered legal entity, and it does
not sell lifting equipment (slings, shackles, chains, etc.) or provide inspection/certification services.
※ 본 사이트는 Crosby®, Green Pin® 등 본문에서 언급되는 제조사·표준 단체(KS, LEEA 등)와
아무런 제휴·후원·계약 관계가 없는 독립 사이트입니다. 명시된 자격(LEEA)은 운영자 개인의 자격이며,
본 사이트가 LEEA의 공식 정보 채널이 아님을 명확히 합니다.
※ This site is independent and has no affiliation, sponsorship, or contractual relationship
with manufacturers (Crosby®, Green Pin®, etc.) or standards bodies (KS, LEEA, etc.)
mentioned herein. The LEEA qualification noted is held by the operator as an individual; this site is not an official
LEEA information channel.
7
문의 Contact
Contact
앱에 대한 의견, 오류 신고, 기능 제안은 아래 이메일로 보내주세요.
[email protected]
Please send feedback, bug reports, or feature suggestions to the email below.
[email protected]