중량물 인양 시 슬링(줄걸이)에 걸리는 장력과 필요한 WLL(작업하중한도), 그리고 권장되는 섀클 사양을 빠르게 계산할 수 있는 교육용 웹 도구입니다. 현장 교육생, 안전 관리자, 리깅 학습자가 휴대폰만으로 즉석에서 참고할 수 있도록 설계되었습니다.
An educational web tool that quickly calculates the tension on slings, the required WLL (Working Load Limit), and recommended shackle specifications when lifting heavy loads. Designed so that field trainees, safety managers, and rigging learners can reference it on the spot using just a smartphone.
인양물의 무게와 슬링이 이루는 각도를 입력하면, 정역학(static equilibrium)에 따라 각 슬링이 받는 장력과 안전한 슬링·섀클 사양을 즉시 계산해 보여드립니다.
Enter the load weight and the sling angles, and the app instantly calculates the tension on each sling and safe sling/shackle specifications based on static equilibrium.
인양물의 총 중량을 톤(t) 또는 kN 단위로 입력합니다. 단위는 토글 버튼으로 전환할 수 있습니다.
Enter the total load weight in tons (t) or kilonewtons (kN). You can switch the unit with the toggle button.
연결 줄 수(1~4), 슬링 종류(와이어로프/체인/합성섬유), 히치 방식(Vertical/Choker/Basket)을 선택합니다.
Pick the number of legs (1–4), the sling type (wire rope / chain / synthetic), and the hitch method (Vertical / Choker / Basket).
두 슬링이 이루는 내각(included angle)을 입력합니다. 2줄인 경우 비대칭 모드로 전환하면 각 슬링의 수직 기준각(β₁, β₂)을 따로 입력할 수 있습니다.
Enter the included angle between the two slings. For 2-leg lifts, switching to asymmetric mode lets you enter each sling's angle from vertical (β₁, β₂) independently.
스마트폰을 슬링에 댄 채 "측정 시작"을 누르면 자이로 센서로 각도를 자동 인식합니다. iOS Safari는 권한 허용이 필요하며, HTTPS 환경에서만 동작합니다.
Press "Start measurement" with your smartphone held against the sling, and the gyroscope reads the angle automatically. iOS Safari requires permission, and the feature only works on HTTPS pages.
"계산 실행" 버튼을 누르면 결과 화면으로 전환되어 안전 평가, 분력도, 필요 WLL, 권장 섀클, 적용 공식까지 확인할 수 있습니다.
Press the "Calculate" button to switch to the results screen, where you can review the safety rating, force diagram, required WLL, recommended shackle, and the formulas used.
모든 슬링이 같은 각도로 균등하게 하중을 분담한다는 가정 아래, 각 슬링의 수직 분담 하중 V는 전체 하중 W를 유효 슬링 수 n으로 나눈 값입니다. 슬링이 수직선과 이루는 각을 β라 할 때,
Assuming all slings share the load equally at the same angle, the vertical component V on each sling is the total load W divided by the effective number of slings n. Letting β be the angle between the sling and the vertical line,
여기서 α는 수평 기준각(α + β = 90°)이며, 실무에서 측정이 쉽기 때문에 α 기준으로 표기하는 경우가 많습니다.
Here α is the angle measured from horizontal (α + β = 90°). In the field, α-based notation is common because it is easier to measure.
두 슬링이 다른 각도(β₁, β₂)로 매달릴 때는, 인양물의 무게중심이 두 슬링이 만나는 수직선상에 있다는 평형 조건에서 다음이 유도됩니다.
When two slings hang at different angles (β₁, β₂), the equilibrium condition — that the load's center of gravity sits on the vertical line where the slings meet — yields:
이 식에서 알 수 있듯, 수직에 가까운 슬링(β가 작은 쪽)이 더 큰 장력을 받습니다. 비대칭 인양에서 사고가 발생하는 핵심 메커니즘이 바로 이것입니다.
The equations show that the sling closer to vertical (smaller β) carries the larger tension. This is the core mechanism behind asymmetric-lift accidents.
계산된 슬링 장력 T를 히치 효율(Vertical 100%, Choker 75~80%, Basket 200%)로 나눈 값입니다. 이 값 이상의 WLL을 가진 슬링을 선정해야 안전합니다.
The computed sling tension T divided by the hitch efficiency (Vertical 100%, Choker 75–80%, Basket 200%). A sling with a WLL at or above this value must be selected to be safe.
이 도구의 계산 결과는 교육 및 학습 참고용으로만 제공됩니다. 실제 인양 작업에 사용해서는 안 됩니다.
The results from this tool are provided for educational and learning reference only. They must not be used for actual lifting operations.
앱에 대한 의견, 오류 신고, 기능 제안은 아래 이메일로 보내주세요.
[email protected]
Please send feedback, bug reports, or feature suggestions to the email below.
[email protected]